10W Engraving Speed/Power Reference Chart
Updated
10W Laser Engraving Referrance Chart
| Materials | Engrave or Cut | Recommended Power 0%-100% |
Recommended Engraving Speed 0-100% |
Remark |
|---|---|---|---|---|
| 3.0MM Plywood | Engrave | Pwr 30% | Spd 90% | It needs to be adjusted based on different woods ,different colors. |
| Cut | Pwr 100% | Spd 30% | ||
| 5.0MM Plywood | Engrave | Pwr 30% | Spd 90% | It needs to be adjusted based on different woods ,different colors. |
| Cut | Pwr 100% | Spd 15% | ||
| 8.0MM Plywood | Engrave | Pwr 30% | Spd 90% | It needs to be adjusted based on different woods ,different colors. |
| Cut | Pwr 100% | Spd 15% (2-pass) | ||
| 5mm Solid wood | Engrave | Pwr 30% | Spd 90% | It needs to be adjusted based on different woods ,different colors. |
| Cut | Pwr 100% | Spd 30% | ||
| 304 Stainless Steel | Engrave | Pwr 100% | Spd 70% | No needs mark |
| Titanium alloy | Engrave | Pwr 100% | Spd 40% | No needs mark |
| Paperboard (Cardboard Box) | Engrave | Pwr 30% | Spd 90% | It needs to be adjusted based on different thickness paperboards, different colors. |
| Cut | Pwr 70% | Spd 90% | ||
| T-Shirt (Dark color) | Engrave | Pwr 5% | Spd 90% | It needs to be adjusted based on different thickness, different colors. |
| Cut | Pwr 30% | Spd 90% | ||
| Leather (Black) | Engrave | Pwr 50% | Spd 90% | It needs to be adjusted based on different leathers, different colors. |
| Cut | Not recommended | Not recommended | ||
| Leather (Green) | Engrave | Pwr 30% | Spd 90% | It needs to be adjusted based on different leathers, different colors. |
| Cut | Not recommended | Not recommended | ||
| Plastic | Engrave | Pwr 20% | Spd 90% | Cannot engrave transparent Plastic. It needs to be adjusted based on different Plastics, different colors. |
| Cut | Not recommended | Not recommended | ||
| Rubber | Engrave | Pwr 50% | Spd 90% | It needs to be adjusted based on different Rubbers, different colors. |
| Cut | Not recommended | Not recommended |
