SainSmart
  • Home
  • Genmitsu CNC
  • 3D Printing
  • Contact

All Categories ​>​ ​CNC ​ > ​ ​3018 MX3

3018 MX3

Troubleshooting For Common Issues with 3018-MX3

Problem: The X Axis is Binding/ Not Moving Smoothly. As shown below, loosen four screws of the two Guide Rails (X-axis),and also loosen these four screws of Stepper motor. Power on the CNC, open up M…

Updated 11 months ago by George

Genmitsu 3018-MX3 Resources

Introduction. This compendium is the collection of resources for Genmitsu 3018-MX3 provided by SainSmart and community members. You can join our Facebook group for discussions and project ideas for y…

Updated 11 months ago by George

Powered by HelpDocs (opens in a new tab)

Powered by HelpDocs (opens in a new tab)

Contact