5W Laser Engraving Speed/Power Reference Chart
Updated
Material | Engraver/Cut | Power | Speed | Note |
5mm Basswood | Engrave | 30% | 80% | |
5mm Basswood | Cut | 100% | 15% | |
3mm Plywood | Engrave | 70% | 60% | |
3mm Plywood | Cut | 100% | 11% | |
Kraft Paper | Engrave | 60% | 80% | |
Kraft Paper | Cut | 100% | 40% | |
Acrylic | Engrave | 60% | 80% | Do not engrave on the transparent surface directly. Paste a kraft paper film above the surface before engraving. |
Acrylic | Cut | 100% | 8% | |
Solid Wood | Engrave | 70% | 80% | |
Leather | Engrave | 40% | 100% | |
Stainless Steel | Engrave | 100% | 1% | Paint the material black before engraving. |
Slate Coaster | Engrave | 70% | 90% |
