Genmitsu Wireless Controller Firmware
Genmitsu Wireless Controller
Firmware version
Genmitsu_v1.1.1 (Click to download)
Release Note
Confirmed fixes for issues: 1. Connection stability during G-code execution • Fixed the issue where the APP could not reconnect after multiple disconnections during G-code execution. • (In actual tests, the issue did not reappear on the old firmware, but in this update we added an extra layer of error handling as prevention.) 2. Spindle startup & S-value adjustment • Fixed a firmware misjudgment issue where dynamic adjustment of the spindle S-value triggered incorrect PC-side connection detection.
Genmitsu_v1.0.9 (Click to download)
Genmitsu_v1.0.8 (Click to download)
Genmitsu_v1.0.7 (Click to download)
Genmitsu_v1.0.6 (Click to download)
Release Note
Fixed Bugs *Automatic premature termination and restart during G-code file execution *Probabilistic occurrence of inability to immediately start a new job after the completion of a G-code job
Genmitsu_v1.0.5(Click to download)
Release Note
Fixed the problem that running the probe function caused the APP to crash.
Genmitsu_v1.0.4(Click to download)

Genmitsu_v1.0.3(Click to download)

Genmitsu_v1.0.2(Click to download)
Release Note

Genmitsu_v0.1.1 (Click to download)
Genmitsu_v0.1.0 (Click to download)