Z-Probe Offset Calibration Guide
Updated
Cubiko Platform Z-Probe Offset Calibration Guide
Why should I do this?
Calibrating the Z-Probe offset ensures your machine knows the exact distance between the probe trigger point and the actual surface. Without it, your CNC might start cutting too high (air cutting) or too low (crashing into the bed). A properly set Z-offset = clean cuts, accurate engravings, and better results.
Step-by-step Guide
Cubiko_calibration-20250620.pdf (Click here to view PDF version)
TIP: After receiving the new machine and using it for a period of time, we recommend performing a calibration procedure.
Start with Genmitsu APP
Scan to install | |
 |  |
 |  |
