All Categories ​>​ ​Software

Software

Cubiko Firmware Page

Firmware version. Cubiko_WiFi_v1.0.0 (Click to download) Cubiko_WiFi_v1.0.1 (Click to download)

Updated by Lynn

How to Set Up Universal Gcode Sender (UGS) for Windows Operating System

Step 1: Downloading & Installing Driver. While UGS itself does not need a driver to run after being installed on your computer, a driver is needed for your CNC to communicate with the software. This…

Updated by George

Genmitsu APP Resources

Introduction. The Genmitsu app establishes a seamless connection to your CNC machines and laser devices, offering an intuitive interface with customized functionalities tailored for the CNC and laser…

Updated by Lynn

CNC and Laser Software Compatibility Guide

CNC Software. There is a wide range of CNC software available, which can understandably be daunting for new users to navigate. Whether you’re looking for free CNC software, CNC software for woodworki…

Updated by George

Control Panel Firmware Page

Firmware version. Control_Panel_v1.0.0 (Click to download)

Updated by Lynn

Install the Wi-Fi module on 3020-PRO MAX V2

1. Loosen the motherboard screws and locate the connector on the back of the motherboard. 2. Remove the acrylic case of the Wi-Fi Module and install the module directly on the motherboard. 3. Close t…

Updated by Lynn

Genmitsu APP Operation Guide (CNC Sections)

Network Setting For Device:. Getting Genmitsu wifi modules connected to home/office wifi network Connecting to the Wi-Fi Module Open the App: Launch the mobile app for your Wi-Fi module. Access Netwo…

Updated by Lynn

Wi-Fi Connection Guide for L8, Kiosk Laser with Genmitsu APP

Before using the Genmitsu APP, please check your machine has the latest version of the firmware. L8_Firmware_C21-250210.bin (Click to download). Kiosk_C05_241231.bin (Click to download). Update firmw…

Updated by Lynn

Powered by HelpDocs (opens in a new tab)

Powered by HelpDocs (opens in a new tab)