Genmitsu 3018 PROVer Mach3 Resource Page
Introduction
This compendium is the collection of resources for the Genmitsu 3018 PROVer Mach3 provided by SainSmart and community members.
You can join our Facebook group for discussions and project ideas for your new CNC machine.
Assembly
- Prover Mach3 User Manual: A PDF copy of the latest user manual for the Prover Mach3
- Prover Mach3 Assembly & Testing Video by Techydiy
CNC Controller Software Installation
Software Links:
- DrufelCNC: A Free, open-source alternative to Mach3
- About DrufelCNC
- Video By Drufel for setting up software for 3018 Prover Mach3 & MX-3 CNC's
- Mach3: An Industry Standard, this software lets professionals take their favorite software out of the workplace and into their homes.
Configuration & Testing
- Gcode Samples: Originally provided on the Disc that came with your CNC, these are pre-made test cuts users can use to try out their machine, or to help troubleshoot issues with other files.
- Troubleshooting your MX3: This guide is 100% applicable for the Prover Mach3 CNC
Machine Operation
- MX3 Z-Probe Setup & Operation: This guide works for the PROVer Mach3 as well as the MX3 and utilizes Mach3 software,
- Hand Wheel Operation Instructions: Sold separately, a hand wheel can be used to operate the Prover Mach3 similar to traditional industrial machines. This guide will walk you through how to set up and operate it.
- CNC Bit Selection Buyers Guide
Laser Guides & Instructions
- Laser Engraving Basics: This guide covers the basics of setting up a laser module in Mach3 software,
