Genmitsu PROVerXL 6050 Plus Resource Page

Introduction

This compendium is the collection of resources for Genmitsu PROVerXL 6050 Plus provided by SainSmart and community members.

You can join our Facebook group for discussions and project ideas for your new CNC machine.

Comparison

Assembly

CNC Controller Software Installation

  • How to Install Candle/GRBLControl for Windows
    • GRBLControl/Candle 1.17 (For Windows): Link downloads a .zip file containing a full copy of Candle, the software you can use to run your CNC through your computer. Must unzip entire folder to use.
    • CH341SER Driver (For Windows): If windows does not do so automatically when you connect your CNC to the computer for the first time, this downloadable file is the Driver which is needed for your computer to be able to communicate with your CNC.
  • How to Install Candle/GRBL Control for Mac (Except for Catalina & Later Versions)
    • Please Note if you Have Mac OS Catalina or later: Unfortunately, due to recent security changes in Catalina and Big Sur, Candle has been unable to run on these systems. At this time there are no fixes, as a lot of the issues are related to how Big Sur changed what software is acceptable, and what is not. Since Candle has not been updated for Mac in some time, it is unfortunately not permitted by the operating system anymore even though it is "Mac Compatible" in every conventional sense of the term.
      What we have been advising Mac Catalina & Big Sur users to do is to migrate to UGS or Easel, a browser-based variant of Candle which is also free to use.

Machine Operation

Troubleshooting

  • GRBL Error Code List & Meaning: Whenever something is going wrong with your CNC, GRBL tries its best to provide you with an error code to help you in diagnosing and resolving the issue you are having. This information is invaluable in getting your CNC back up and running so we suggest that you keep an eye out for error codes and make sure to include this information if you need further support from us.
  • CNC Router Trouble Shooting (Click to view more)
  • About Laser Module Installment

Other CAD/CAM Software

Mainboard Wiring

Milling Bits in the box
  • 2 x End Mills: 2.5mm/3.175mm, 1/8'' Shank
  • 2 x V-bits: 30°/15°, 0.1mm, 1/8'' Shank
  • 2 x PCB Drill Bits: 1.5mm/2.0mm, 1/8'' Shank
  • 2 x Ball Nose Spiral End Mills: 3.175x17mm, 2.0x10mm, 1/8'' Shank, 2-Flute
  • 1 x Straight Router Bit: 1/8'' Shank, 2-Flute
  • 1 x V-Groove Bit: 0.1mm 90°, 1/8'' Shank


How did we do?


Powered by HelpDocs (opens in a new tab)

Powered by HelpDocs (opens in a new tab)